LED Solar Water Fountain

Features:

1. Built-in high-performance polymer lithium battery, which can work for 4-6 hours after the battery is full, and can be sprayed with water while charging during the day.
2. Built-in water level monitoring system, when the bottom sensor does not reach the water, it can automatically stop working to prevent the pump idling from having a large impact on the life of the product.
3. Add night mode, when solar panel can not sense sunlight, it will start night mode, LED light and water pump work at the same time for 4 hours.

Solar panel specifications:

Rated voltage: 10V
Rated power: 2.5W
Material: ABS+PE
Size:19.6*18.5*5.1cm

Pump specifications:

Working voltage: DC 10v
Working current: 135MA
Highest head: 120CM
Maximum flow: 210L/H
Pump life:> 20000 hours
Pump noise: <45DB

Product performance:

Water spray height: 30-70cm, connect different spray heads, the height of water spray will be different.
When the solar panel receives sufficient sunlight, the pump will start within 3 seconds.

Instructions:

1) Assemble the product according to the schematic diagram.
2) Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally.
3) When the pump is just put into the water, there is air in it, which may affect the spraying effect. It is recommended to wait for the pump to spray normally before connecting the nozzle.

Packing Includes and Real Shot

Noted:

1 The water pump must be completely immersed in water, and cannot be dehydrated for a long time. When the pump is just immersed in water, because there is air in the pump, it is recommended to insert the nozzle after the pump sprays water normally.
2 Please keep the water source clean and clean the water pump regularly to prevent foreign objects from being sucked in by the water pump and causing the water pump to not work properly.